Nucor Corporation announced today consolidated net earnings of $268.5 million, or $0.83 per diluted share, for the third quarter of 2017. By comparison, Nucor reported consolidated net earnings of $323.0 million, or $1.00 per diluted share, for the second quarter of 2017 and consolidated net earnings of $305.4 million, or $0.95 per diluted share, for the third quarter of 2016.

For the first nine months of 2017, Nucor reported consolidated net earnings of $948.4 million, or $2.94 per diluted share, compared with consolidated net earnings of $636.6 million, or $1.99 per diluted share, for the first nine months of last year. Consolidated net earnings of $2.94 per diluted share for the first nine months of 2017 exceeds the reported annual diluted earnings per share for each of the previous eight years.

Earnings (loss) before income taxes and noncontrolling interests by segment were as follows for the third quarter and first nine months of 2017 and 2016 (in thousands):

 

		Three Months (13 Weeks) Ended				Nine Months (39 Weeks) Ended
		Sept. 30, 2017		Oct. 1, 2016		Sept. 30, 2017		Oct. 1, 2016
Steel mills		$        432,718		$        591,799		$    1,734,245		$    1,402,898
Steel products		59,225		72,578		131,956		197,891
Raw materials		9,957		14,313		102,575		(76,240)
Corporate/eliminations		(111,045)		(194,518)		(520,810)		(480,930)
		$        390,855		$        484,172		$    1,447,966		$    1,043,619

Earnings in the third quarter of 2017 include a net benefit totaling $13.2 million, or $0.04 per diluted share, related to tax return true-ups and state tax credits. Included in the third quarter of 2016 results were charges related to legal settlements of $33.7 million ($0.06 per diluted share) and a net benefit of $11.1 million ($0.02 per diluted share) related to fair value adjustments to assets in the corporate/eliminations segment.

Nucor's consolidated net sales of $5.17 billion in the third quarter of 2017 was consistent with $5.17 billion in the second quarter of 2017 and increased 21% compared with $4.29 billion in the third quarter of 2016. Average sales price per ton in the third quarter of 2017 increased 2% from the second quarter of 2017 and increased 7% from the third quarter of 2016. Total tons shipped to outside customers were 6,618,000 tons in the third quarter of 2017, a 2% decrease from the second quarter of 2017 and a 12% increase from the third quarter of 2016. Total third quarter steel mill shipments decreased 3% from the second quarter of 2017 and increased 18% from the third quarter of 2016. Third quarter of 2017 downstream steel products shipments to outside customers increased 10% from the second quarter of 2017 and increased 3% from the third quarter of 2016.

In the first nine months of 2017, Nucor's consolidated net sales increased 24% to $15.16 billion, compared with $12.25 billion in last year's first nine months, and total tons shipped to outside customers increased 8% from the first nine months of 2016, while average sales price per ton increased 15%.

The average scrap and scrap substitute cost per ton used during the third quarter of 2017 was $317, an increase of 1% from $313 in the second quarter of 2017 and an increase of 26% compared with $252 in the third quarter of 2016. The average scrap and scrap substitute cost per ton used in the first nine months of 2017 was $304, an increase of 35% from $225 in the first nine months of 2016.

Overall operating rates at our steel mills decreased to 83% in the third quarter of 2017 as compared to 88% in the second quarter of 2017 and increased from 74% in the third quarter of 2016. Operating rates for the first nine months of 2017 increased to 86% as compared with 80% for the first nine months of 2016.

Total steel mill energy costs for the third quarter of 2017 increased approximately $2 per ton and $1 per ton compared to the second quarter of 2017 and the third quarter of 2016, respectively. The increase from the second quarter of 2017 was due to reduced steel production volumes and increased electricity unit costs and the increase from the third quarter of 2016 was primarily due to higher electricity unit costs. Total steel mill energy costs for the first nine months of 2017 also increased $2 per ton compared to the first nine months of 2016 primarily due to higher electricity and natural gas unit costs.

Our liquidity position remains strong with $1.6 billion in cash and cash equivalents and short-term investments, as of September 30, 2017, and an untapped $1.5 billion revolving credit facility that does not expire until April 2021. During the third quarter of 2017, we repurchased approximately 1.6 million shares of the Company's common stock for an average share price of $56.76.

Nucor completed its acquisition of St. Louis Cold Drawn, Inc. on September 1, 2017. St. Louis Cold Drawn, Inc. is a manufacturer of cold drawn rounds, hexagons, squares and special sections that mainly serves the U.S. and Mexican automotive and industrial markets. St. Louis Cold Drawn, Inc. employs 125 people and has two manufacturing locations, one in St. Louis, Missouri, and the other in Monterrey, Mexico, that have a combined annual capacity of 200,000 tons. The addition of these facilities increased the total capacity of Nucor's cold finished bar and wire facilities to more than 1.1 million tons annually and helps advance our goal of growing our sales to automotive customers.

In September, Nucor's board of directors declared a cash dividend of $0.3775 per share payable on November 9, 2017 to stockholders of record on September 29, 2017. This dividend is Nucor's 178th consecutive quarterly cash dividend, a record we expect to continue.

Also in September, Nucor's board of directors approved investments in Nucor's bar mill business, including the expansion of its existing merchant bar operations and micro mill investments. Both of these projects are part of Nucor's planned strategy for long-term profitable growth. By leveraging Nucor's existing operating abilities, we expect that these projects will help to maintain our position as a low-cost producer and will allow us to better serve our customers.

Imports continue to negatively impact the U.S. steel industry. Through the first nine months of 2017, finished steel imports accounted for an estimated 27% share of the U.S. market and have increased an estimated 15.1% compared to the same period last year. The industry continues to pursue trade cases to combat unfairly traded imports. Final determinations issued earlier this year against cut-to-length steel plate imports from twelve countries are having a positive impact as steel imports of these products have decreased in the first nine months of this year compared to the same period last year. The United States Department of Commerce has made several rulings imposing duties on additional steel products since the beginning of the year that are favorable to the domestic steel industry. Although slower than we would like, we are encouraged by the steady progress that we are achieving through the prosecution of product and country specific trade cases. We believe this success is due to the overwhelming evidence that our foreign competitors receive support from illegal subsidies.

The performance of our steel mills segment decreased in the third quarter of 2017 as compared to the second quarter of 2017 and the third quarter of 2016. Despite high utilization rates at our sheet mills, continued pressure from imports has prevented prices from keeping pace with increasing raw material costs. The profitability of our plate mills decreased significantly in the third quarter of 2017 as compared to the second quarter of 2017. The performance of our downstream steel products segment improved in the third quarter of 2017 as compared to the second quarter of 2017 due to higher volumes and higher average selling prices. The profitability of the downstream steel products segment in the third quarter of 2017 decreased from the third quarter of 2016 due to margin compression resulting from higher steel prices. In particular, our rebar fabrication operations have experienced significant declines in performance due to a combination of margin compression caused by higher steel prices and delays on larger, more profitable projects. Our raw materials segment's performance decreased in the third quarter of 2017 as compared to the second quarter of 2017, primarily due to Nucor Steel Louisiana experiencing unplanned outages for most of the quarter. The facility resumed operations on October 3, 2017 and is producing high-quality direct reduced iron (DRI).

Approaching the end of 2017, we are encouraged by a number of positive factors impacting our markets going into 2018. We see generally stable or improving market conditions for nonresidential construction, automotive, energy, heavy equipment and agriculture.  Although illegally traded imports remain at unacceptable levels, we are encouraged by the cumulative benefits of the domestic steel industry's successful trade cases.  We expect fourth quarter of 2017 earnings to be similar to slightly decreased from the third quarter of 2017, exclusive of the previously mentioned tax benefits recognized in the third quarter of 2017. We expect much improved performance by the raw materials segment driven by more consistent DRI production.  The downstream steel products segment is also likely to benefit from margin improvement. We expect the steel mills segment to see some decline mainly due to weakness in plate steel and typical seasonality.  

In the fourth quarter of 2016, the Company changed its method of accounting for certain inventories from the last-in, first-out (LIFO) method to the first-in, first-out (FIFO) method, which required retrospective application to prior period financial statements. Accordingly, all amounts for prior periods presented in this release are presented after the retrospective application of the change in accounting principle.

Nucor and its affiliates are manufacturers of steel products, with operating facilities primarily in the U.S. and Canada. Products produced include: carbon and alloy steel -- in bars, beams, sheet and plate; hollow structural section tubing; electrical conduit; steel piling; steel joists and joist girders; steel deck; fabricated concrete reinforcing steel; cold finished steel; steel fasteners; metal building systems; steel grating; and wire and wire mesh. Nucor, through The David J. Joseph Company, also brokers ferrous and nonferrous metals, pig iron and hot briquetted iron/direct reduced iron; supplies ferro-alloys; and processes ferrous and nonferrous scrap. Nucor is North America's largest recycler.

Certain statements contained in this news release are "forward-looking statements" that involve risks and uncertainties. The words "believe," "expect," "project," "will," "should," "could" and similar expressions are intended to identify those forward-looking statements. Factors that might cause the Company's actual results to differ materially from those anticipated in forward-looking statements include, but are not limited to: (1) competitive pressure on sales and pricing, including competition from imports and substitute materials; (2) the sensitivity of the results of our operations to prevailing steel prices and the changes in the supply and cost of raw materials, including scrap steel; (3) market demand for steel products; and (4) energy costs and availability. These and other factors are discussed in Nucor's regulatory filings with the Securities and Exchange Commission, including those in Nucor's fiscal 2016 Annual Report on Form 10-K, Item 1A. Risk Factors. The forward-looking statements contained in this news release speak only as of this date, and Nucor does not assume any obligation to update them.

You are invited to listen to the live broadcast of Nucor's conference call in which management will discuss Nucor's third quarter results on October 19, 2017 at 2:00 p.m. eastern time. The conference call will be available over the Internet at www.nucor.com, under Investor Relations.

TONNAGE DATA
(in thousands)
		Three Months (13 Weeks) Ended						Nine Months (39 Weeks) Ended
		Sept. 30, 2017		Oct. 1, 2016		Percentage Change		Sept. 30, 2017		Oct. 1, 2016		Percentage Change
Steel mills total shipments:
	Sheet	2,617		2,260		16%		8,041		7,510		7%
	Tubular products	242		-				692		-
	Bars	2,069		1,805		15%		6,027		5,513		9%
	Structural	539		624		-14%		1,738		1,821		-5%
	Plate	553		416		33%		1,744		1,570		11%
	Other	145		108		34%		417		376		11%
		6,165		5,213		18%		18,659		16,790		11%
Sales tons to outside customers:
	Steel mills	5,096		4,465		14%		15,620		14,446		8%
	Joist	127		129		-2%		332		322		3%
	Deck	119		123		-3%		329		332		-1%
	Cold finished	119		99		20%		361		328		10%
	Fabricated concrete
	reinforcing steel	319		311		3%		857		857		-
	Other	838		762		10%		2,451		2,209		11%
		6,618		5,889		12%		19,950		18,494		8%

 

 

 

 

Source:prnewswire.com

Report Abuse