Zamil Steel

Single Skin Panels

Single Skin Panels

 The panels used in the construction of Zamil Steel Pre-Engineered Buildings are composed of the following:

• Base metal of either Galvalume coated steel conforming to ASTM A 792M Grade 345B or aluminum conforming to ASTM B 209M Alloy 3003 Temper H26. Galvalume coating is 55% Aluminum and about 45% Zinc by weight.

• An exterior surface coating on painted panels of 25 microns of epoxy primer with a highly durable polyester finish.

• An interior surface coating on painted panels of 12 microns of epoxy primer and modified polyester or foam spec.

Minimum Yield Strength is 34.5 kN/cm2

This deep-ribbed type "G" panel is the standard Zamil Steel deck panel for mezzanines and floor systems. Although exceptionally strong, this panel is used as shuttering for mezzanine reinforced concrete floors and panel is not a substitute for the reinforcement of mezzanine concrete slabs.

The type "G" panel is available only (unpainted) in 0.7 mm pre-galvanized coating over steel conforming to ASTM A653M SS Grade 550: Coating Z180.