Company : Regent Steel & Engg Co.

Category : Hydraulic Piping Systems

Key Products : Inconel 625, Monel 400, Nickel 200

Regent Steel & Engg. Co., is one of the leading stockiest and exporter of pipe fitting and flanges & stockiest of all kinds of industrial raw materials in stainless steel & nickel alloys. They are well known for providing a comprehensive range of ferrous and non metal products like seamless & erw pipes, coil, rods, fasteners, sheets, flanges, welding rods, forged fittings and butt weld fittings in stainless steel, mild steel & nickel alloys. They sell their products at competitive prices for any of the requirements in stainless steel, carbon steel and nickel alloys with best quality and service.

 

They are into this business from past 20 years supplying their materials world wide. Most of their clients are from public sector undertaking companies like defense, fertilizer, chemical, power, petroleum, valve manufacturer, thermal power etc. They meet their customer’s specification and international standard & codes. They export their products to many countries like USA, Italy, UAE, Kuwait, Spain, Malaysia, Bangkok, etc.

 

Hastelloy C276 Round Bars

Inconel C-276® (alloy C276- UNS N10276) is a nickel-molybdenum-chromium alloy with excellent corrosion resistance in severe environments. Inconel C-276® (UNS N10276) is used in pollution control, chemical processing, pulp and paper production, and waste treatment. Available forms of alloy C276- UNS N10276 are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Inconel Round Bars

Inconel ® 625 (UNS N06625) is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. Alloy 625-UNS N06625 has excellent fatigue strength and stress corrosion cracking resistance to chloride ions. Typical applications for Alloy 625-UNS N06625 include heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications.

Incoloy Forged Round Bars

Incoloy 800® (UNS N08800) is a nickel-chromium alloy with good strength and excellent resistance to oxidation and carburization. The alloy 800- UNS N08800 maintains stable structure during exposure to high temperature; therefore Incoloy 800® (UNS N08800) has good corrosion resistance to many acidic environments.

Monel Nickel Copper Alloy

Monel 400® one of the common trade name of alloy 400-UNS N04400 is a nickel-copper alloy that is hardened by cold working only. Monel 400® (UNS N04400) has low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400® (UNS N04400) can be used in temperatures up to 1000 ºF and the alloy has great mechanical properties at subzero temperatures.

 

UNS N02200

 

 

Nickel 200-UNS N02200 is 99.6% pure nickel, one of the toughest metals. The Nickel 200's characteristics include excellent mechanical properties, low gas content, low vapor- pressure, magnetic properties and high thermal and electrical conductivity. These properties and its chemical composition make Nickel 200-UNS N02200 fabricated and highly resistant to corrosive environment. Nickel 200-UNS N02200 is useful in any environment below 600º F. It is highly resistant to corrosion by neutral and alkaline salt solutions. Nickel 200-UNS N02200 also has low corrosion rates in neutral and distilled water.

 

Monel Pipes & Tubes

Monel K-500® (UNS N05500) is a nickel-copper alloy with the same corrosion resistance and characteristics as that of Monel 400®. The Monel K-500® (UNS N05500) has a greater strength and hardness than the Monel 400®, as a result of added aluminum and titanium. In age-hardened condition, the Monel K-500®-UNS N05500 has greater tendency toward stress- corrosion cracking.

 

UNS N06600

 

 

Inconel 600® (UNS N06600) is a standard engineering material and has a great resistance to heat and corrosion. Inconel 600® (UNS N06600) also has high strength and can be easily formed. This Alloy 600-UNS N06600 can be hardened and strengthened only by cold work. Inconel 600® (UNS N06600) can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays.

 

Contact Details

Regent Steel & Engg Co.
23/25/27
Guruchhaya Apt. 2nd Floor
1st Parsiwada
V.P. Road, Mumbai - 400 004
INDIA.
Tel: +91-22- 2388 4555/6639 4655
Fax: +91-22- 2388 4556
Email: sales@regentsteel.com
info@regentsteel.com
Website:www.regentsteel.com